norbar-pneutorque-standard-series

Pneutorque® Standard Series

Based on the original Pneutorque®, the ‘Standard Series’ range is a direct result of over 50 years of refinement and development necessary to keep pace with the requirements of industry today.

In Stock
Share (1)
Total: 0 Total: 1 Total: 0 Total: 0 Total: 0 Total: 0
Categories: , , Tags: ,

Description

In use in many thousands of applications worldwide Pneutorque® wrenches continue to represent the foundation of Norbar’s powered tool range. Two speed models offer all the advantages of single speed versions but with the additional benefit of a run-down speed five times greater than the high torque speed setting.

  • Models available for almost every bolting and torque application, up to 300,000 N.m
  • Forward and reverse operation
  • Quiet, non-impacting or pulsing operation – low operator fatigue
  • Stall control gives repeat-ability of ±5% on a given joint
  • Other reaction styles can be designed to suit specific applications
  • Electronic torque transducers can be fitted for precise torque monitoring

DOWNLOADS

Norbar Pne...

File size: 2.19 MB
Created: 08-10-2019
Updated: 08-10-2019
Hits: 302
Download Preview

Enquire

"*" indicates required fields

Full Name*
This field is for validation purposes and should be left unchanged.

Related products

  • norbar-evotorque-2
    Powered Torque Tools

    Evotorque®2

    The EvoTorque®2 is an electronic torque tool designed to accurately apply torque to threaded fasteners. Tools are factory calibrated to ±3% of reading. The unique ‘intelligent joint sensing’ technology continually measures the joint during tightening and when necessary, employs dynamic braking to avoid torque over-shoot due to motor inertia. Consequently, EvoTorque®2 can apply torque accurately over a wide range of joint rates from hard (high torque rate) through to soft (low torque rate). All EvoTorque®2 tools are highly tolerant of supply voltage and frequency variation. If the supply voltage is outside of tolerance then, as a safety feature, the tool will be prevented from starting.

    (0 reviews)
  • Norbar-Handtorque-Compact-Series
    Torque Multipliers

    Handtorque® Compact Series
    • Compact dimensions allow excellent access to applications and easy, safe handling
    • Lightweight for torque capacity
    • Supplied as standard with an aluminium reaction arm (steel reactions for HT-52). Other options are available on request, including customised reactions
    • Torque multiplication accuracy ±4%
    • Robust, 48 tooth Anti Wind-Up Ratchet (AWUR) contains the forces generated during tightening for safe and easy operation
    • Each multiplier is supplied with its own unique calibration certificate allowing the accurate calculation of input torque for critical applications
    (0 reviews)
  • Norbar-Handtorque-Standard-Series
    Torque Multipliers

    Handtorque Standard Series
    • Torque multiplication accuracy ±4%
    • High ratios allow the use of a small torque wrench, multipliers can be used where access is limited
    • Anti Wind-Up Ratchet available on models of 25:1 ratio and above
    • Other reaction styles can be designed to suit specific applications
    • Electronic torque transducers can be fitted for precise torque monitoring, see page 95
    • Other models available up to 300,000 N.m
    • If calibration is required, a UKAS accredited calibration certificate may be ordered (at extra cost) up to 6,000 N·m
    (0 reviews)